The preparation work before juicing includes: Cleaning ingredients: Thoroughly clean fruits and vegetables with clean water to remove pesticide residues and dirt from the surface. Peeling and cutting: Choose whether to peel according to personal taste, and cut the ingredients into pieces that are suitable for the feeding port of the juicer for easy juicing. Seed removal: For fruits such as watermelon and peaches, it is necessary to remove the seeds to avoid affecting the taste of the juice.

When using a juicer, the following points should be noted: Put the prepared ingredients into the feeding tube to avoid overloading. Set the appropriate speed according to the type of juicer. When using a push rod to push down ingredients, apply even force to avoid clogging.

The cleaning and maintenance steps of the juicer are as follows: Clean it promptly after use to avoid residue. Disassemble each component and clean it with clean water, which can be cleaned with a brush. Avoid using iron brushes, abrasives, or sharp tools during cleaning, and the water temperature should not exceed 40 ℃. Wipe the host part with a slightly damp and soft cloth, and do not put it in water. After cleaning, dry all accessories and place them in a dry and ventilated place.

Juicers are suitable for processing most fresh fruits and vegetables, such as apples, oranges, carrots, celery, etc. However, it should be avoided to handle ingredients that are too hard or have high fiber, such as sugarcane, nuts, etc., to avoid damaging the machine.

If the juicer stops due to overheating protection, the power should be turned off first, and then restarted after it cools down.

The abnormal noise produced by the juicer during use may be caused by blade wear, motor failure, or blockage of ingredients. At this point, the use should be stopped immediately, and the blade should be checked for tightness, the motor for wear, and the ingredients for even placement.

To extend the service life of the juicer, the following points can be noted: Regularly inspect all components of the juicer to ensure they are in good condition. When the blade wears out, replace it with a new one in a timely manner to ensure the juice extraction effect. Clean and dry all accessories promptly after use to avoid damaging the motor and circuit in a humid environment. Place the juicer in a dry and ventilated place, avoiding direct sunlight and high temperature environments.